Solar Street Light : Semi-Integrated
Semi-integrated solar street lamp only integrated solar cell, controller, and battery, while lamp is separated using cable. This configuration makes semi-integrated lamp cheaper and easier for installation that is suitable for rural area.
Technical Details for solar street light (Semi Integrated) | |||||
SN | Description | SSSL-12/12/50 | SSSL-15/18/60 | SSSL-20/24/75 | SSSL-25/30/100 |
1 | Illumination hours (Backup) | 14 hours | 18 hours | 18 hours | 18 hours |
2 | SPV Module | 50 Wp | 60 Wp | 75 Wp | 100 Wp |
3 | Battery | 12 AH (Li-Po4) | 18 AH (Li-Po4) | 24 AH (Li-Po4) | 30 AH (Li-Po4) |
4 | Battery Voltage | 12.8 Volt | 12.8 Volt | 12.8 Volt | 12.8 Volt |
5 | Luminaries | 12W LED | 15W LED | 20W LED | 25W LED |
6 | Charge controller unit | Microcontroller based double side PCB | |||
7 | Dimmming | 10% dimming after 2 hours, 40% after 4 hours and 50% after 6hours, it can change depend upon customer requirement | |||
8 | Operating hour | Dusk to down | |||
9 | Battery make | SHRI SOLAR | SHRI SOLAR | SHRI SOLAR | SHRI SOLAR |
10 | Solar module make | SHRI SOLAR | SHRI SOLAR | SHRI SOLAR | SHRI SOLAR |
11 | Pole length | 5 Meter | 5 Meter | 5 Meter | 5 Meter |
12 | Pole diameter (OD) | 75 mm | 75 mm | 75 mm | 75 mm |
13 | Pole | Galvanized Iron | Galvanized Iron | Galvanized Iron | Galvanized Iron |
14 | Other mechanical parts | MS with epoxy pent | MS with epoxy pent | MS with epoxy pent | MS with epoxy pent |
Solar Street Light : All In One
FEATURES:
- Micro-processor based intelligent and efficient indigenous design
- Easy to install off-grids system.
- The ftp roof long life lithium battery pack
- All in one solar street-light comes with built-in passive infrared PIR motion sensor which automatically detects human/traffic presence adjusts LED brightness accordingly. If there is no motion for more than 30 seconds, the controller reduces brightness to fifty percent. On detecting any movement in the range of 12 meters, the light will automatically glow at full power. This provides required illumination only when needed and helps in increasing battery backup period.
Technical Details |
||||||
|
SN |
Description |
SSSL/AIO/18/20 |
SSSL/AIO/24/30 |
SSSL/AIO/30/40 |
SSSL/AIO/42/50 |
|
|
1 |
Illumination hours (Backup) |
18 hours |
18 hours |
18 hours |
18 hours |
|
|
2 |
SPV Module (Mono) |
50 Wp |
60/65 Wp |
75/80 Wp |
100 Wp |
|
|
3 |
Battery |
18 AH (Li-Po4) |
24 AH (Li-Po4) |
30 AH (Li-Po4) |
42 AH (Li-Po4) |
|
|
4 |
Battery Voltage |
12.8 Volt |
12.8 Volt |
12.8 Volt |
12.8 Volt |
|
|
5 |
Luminaries |
20W LED |
30W LED |
40W LED |
50W LED |
|
|
6 |
Charge controller unit |
MPPT based double side PCB |
||||
|
7 |
Dimmming with motion sensor (PIR) |
First 4 hours : 100% illumination for 30secs when motion detected & then light glows at 75% Dimming when no motion detected – PIR active state Next 8 hours : By default light glows at 75% dimming up to dawn – PIR deactive state |
||||
|
9 |
Battery make |
SHRI SOLAR |
SHRI SOLAR |
SHRI SOLAR |
SHRI SOLAR |
|
|
10 |
Solar module make |
SHRI SOLAR |
SHRI SOLAR |
SHRI SOLAR |
SHRI SOLAR |
|
|
11 |
Pole length |
5 Meter |
5 Meter |
5 Meter |
5 Meter |
|
|
12 |
Pole diameter (OD) |
75 mm |
75 mm |
75 mm |
75 mm |
|
|
13 |
Pole |
Galvanized Iron |
Galvanized Iron |
Galvanized Iron |
Galvanized Iron |
|